Maft Pro

Description

Items included
-Maft pro unit
-Main maft pro harness
-GM air temp sensor
-GM 3 bar map sensor (speed density mode)
-Speed density harness (air temp + MAP sensor plugs)
-CD containing related install and tuning documents i have collected.
Features and description
-You will have the full ability to tune your motor Low, Mid, High loads in many RPM ranges from 500 to 8 or 9Krpm
-You will want to have a wideband for accurate tuning
-You will have a voltage log/view of the ECU VF fuel trim diagnostic through view of one of the AUX inputs (Aux1 or 2 i cant remember). Allows you to know how hard the ECU is working to maintain fuel trims or if it is happy so you know if your tune is doing ok or if it is too rich or lean.
-You can allow the pro to take full control over IDLE and cruise fuel tune by disconnecting the OEM O2 sensor and feeding wideband input to the Maft Pro. (Part throttle AFR tracking)
-Timing monitor degree advance
-You have the option to add electronic boost control with this unit.
-You have the option to add timing control through RPM range you can +5 degree or -10.